Pages Menu

Posted by on Mar 30, 2015 in Uncategorized | 0 comments

Top Benefits of Replacing a Water Heater Tank with a Tankless Heating System

Has your water heater broken down, and you are in the process of repairing or replacing it? Then before getting another water heater tank consider the advantages of opting for a tankless heating system. By switching to such a system, you’ll be able to save money and have access to much more hot water. By learning what the advantages of tankless water heating systems are, you can make an informed decision regarding if it will meet your requirements. With that thought in mind, read on for some top benefits of tankless water heaters.

  • Unlimited supply of hot water: when you use a water heater tank, you will only have as much hot water as the tank has capacity. Therefore, if you are trying to run a bath, the washing machine is on, and someone is washing the dishes, then you might have trouble having enough hot water. Whereas, with a tankless water system there will be no shortage of water because the water is heated on demand.
  • Cost effective: when using a tankless water heating system, the amount of water that you heat up is equal to the amount of hot water that you use – there is no waste of hot water. Whereas, when heating up a water tank you will need to heat it up in its entirety. However, in the event that you will only need to use half the tank of water then the other half will be wasted. Therefore, a tankless water heating system is cost effective and as a result your energy bills will be lower.
  • Less maintenance: a tank heater will need to be emptied and cleaned out because there will be corrosion and a buildup of limescale. On the other hand, a tankless water heating system will not need any maintenance performed on it as frequently. Furthermore, the absence of anti-corrosion and limescale on tankless water heating systems means that the water will be cleaner.
  • Less space: a tankless water heating unit will not take up as much space as a water tank heater. Therefore, you’ll have more storage space, and higher degree of flexibility when deciding where the tankless water heater should be installed.
  • Longer lifetime: the average water heater tank will have a warranty of about years, and that number for tankless systems is in the region of 10 years. The reason for this difference is related to the fact that tankless water heating systems last longer. 

For more information, contact Affordable Hot Water

Read More

Posted by on Mar 20, 2015 in Uncategorized | 0 comments

Tips for Affording Common Kitchen Renovation Projects

A kitchen renovation can make the space more useable and inviting, and in some cases even add value to your home. One challenge that many homeowners face is being able to afford the kitchen renovations they want done, since materials are often very expensive. However, there are a few simple tips that the pros often use when they need to renovate a kitchen on a tight budget. Note a few of those tips here.

1. Rework Cabinets, Rather than Replace

If your kitchen cabinets are solid but just look old and worn, you may want to consider reworking them rather than replacing them. A good sanding job along with a fresh coat of paint and new hardware can make your cabinets seem brand new. If the doors of the cabinets are outdated or damaged, you may be able to simply replace those rather than the entire cabinet. This can allow you to afford the look of new cabinets without the expense.

2. Use Poured Concrete

New countertops can make an entire kitchen look brand new, but materials like marble or granite can be very costly. A good solution is to use poured concrete. You may not realize it but poured concrete can be painted to stained to look like these other materials, or it can be buffed for a high shine. Concrete can also be shaped and formed very easily, so you can add the personal touch of a rounded countertop or one in any shape. Concrete is typically a fraction of the cost of these other materials so you can use it in the kitchen and also all the home’s bathrooms, for a matching look.

3. Look for Remnants

If you must have granite or marble for a countertop in the kitchen, shop for remnants. These are pieces left over from other jobs and they are usually more affordable than new pieces. You may not have as many options with remnants but typically you can find something that will work for your kitchen, for much less money overall.

4. Shop for Used Fixtures

Salvage yards or online sites that offer used sinks, light fixtures, shelves, and other items you need for your kitchen renovation can be a great way to save. You might find the items you need and which look just as good as brand new, but for less money than buying these new at a home improvement or supply store. You might even find items with more character than what you see in stores, such as an oversized ceramic sink or pendant lights reclaimed from a restaurant. These add character to your kitchen renovation without the cost.

For more information, contact Davis & Park Kitchens

Read More

Posted by on Mar 12, 2015 in Uncategorized | 0 comments

Heated Homes | 3 Electric Heaters For All Types of Homes

Australia is blessed with an abundance of natural sunlight, but ever so often heating during winters is necessary when the temperature becomes cold. When the temperature drops, you shouldn’t waste any time in finding a good heating solution to stay warm. The right water heater will keep you comfortable without costing you a fortune. But all heaters certainly aren’t the same, so where do you get started? While gas heaters work in big houses and oversized rooms, a small enclosed home simply requires an electric heater to do the job. Here’s a look at the different types of electric heaters available for all homes.

Radiant Heaters or Bar Heaters

Radiant heaters are floor and wall-mounted personal heater models. Through a red-hot bar type heating element, these heaters emit warmth throughout the room. Radiant heaters are relatively inexpensive, but they work best in smaller rooms rather than bigger rooms. You must also take care to keep clothing away from these heaters, so they don’t catch fire. They range between $50 and $250.

Oil-Filled Column Heaters

These types of heaters use electricity to heat the oil that is filled inside the columns or heating fins. The oil heat is then transported to the air that circulates around the fins. Oil-filled column heaters are useful for rooms that require heating for extended periods, while operating unattended. For example, oil-filled column heaters work best for heating that is required through the night in the bedroom. The surfaces of these heaters don’t get very hot in comparison to other types of electric heaters. Ceiling fans at low speeds work well to distribute heated air evenly across the room. They cost anywhere from $50 to $200.

Convection Heaters

This type of electric heater pulls in cold air over their electric heating element. The heated air leaves the heater and moves up towards the ceiling, while cooler air moves in again and the process keeps repeating till most of the air in the room gets heated. These heaters usually have a fan to enhance the effect of the convection by forcing the warm air from the heater to move outwards. By using the fan, the room gets heated quicker and uniformly. Convection heaters are portable and can be moved from one room to another, making them a viable option for most rooms in the house. Convection heaters range from $50 to $300, depending on their features and capacity.  

Keep in mind that though electric heating solutions emit less pollution and are relatively efficient, they still consume a portion of your electricity – so be prepared for higher energy bills during winters. For more information, check out companies such as Middleton’s.

Read More

Posted by on Mar 3, 2015 in Uncategorized | 0 comments

How to Purchase the Best Vinyl Tiles for Your Kitchen

You’ve got your kitchen all set up but there’s something missing. You could be left with just the floor to take care of. While there are a lot of options, it would be worth your time to research the perks of using vinyl. If you have decided to opt for vinyl as your material of choice, here are some tips to use when buying vinyl tiles for your kitchen.

Pick the thicker ones

You are looking for tiles that can withstand all the drama that occurs in the kitchen: spills, pet traffic and even naughty children. When making your choice, go for the thicker tiles. These ones are usually more durable and are made of higher quality synthetic chemicals to boost their strength and resilience. The tile is supposed to feel rigid not flexible.

Check the finishing layer

The top wear layer of vinyl tiles can be finished in a wide range of materials to help in keeping dirt and marks off. Some manufacturers create no-wax tiles which resist stains and are able to keep the surface ever shiny. However, they are not suitable for high traffic kitchens and don’t hold up much.

Other producers use urethane layers to cover their tiles and these tiles are much easier to clean than the no-wax kind because they more dirt resistant. They are however more expensive than the no-wax tiles. And then there are the enhanced urethane tiles meant for those kitchens with extreme traffic. They keep the original color and shade of the tiles for a much longer period of time than the previous two.

Appearance

Now this is the fun part. After deciding on your thickness and finish, you are at liberty to pick the style that you love best. Here your personality will come into action complemented by your tastes and preferences. Some of these tiles are able to mimic expensive floor surfaces like marble, faux stone or ceramic tiles.

However, keep the colors lighter, they give the impression of a much larger kitchen. If you’ve got a smaller kitchen, pick out tiles with much smaller pattern. A larger one can handle large bold patterns.

There you have it, a quick guide to help you weed out your options and achieve the glamorous kitchen you deserve. For more tips, information or assistance, contact local resources such as Complete Floor Service. They can help you pinpoint the tiles that will best suit your kitchen and budget.

Read More

Posted by on Feb 23, 2015 in Uncategorized | 0 comments

3 Important Tips for Novice Machinists

Anyone attempting to set up a mechanical fitting/machining shop can attest to the seemingly steep learning curve. Certainly, getting starting with machining is not a trivial matter at all. However, it is not nearly as overwhelming as it can seem.

The secret, as with many things, is to break up the process into a few simple, actionable chunks.

Study Up on Types of Machines and Machining Tools

If you are setting up a machine shop, chances are that you intend to sell your services at some point. Mechanical fitting is a wide field, so it is important to figure out exactly what types of parts you will be dealing with.

Different parts require different machines to repair and manufacture. Once you’ve chosen your niche, you need to determine the materials and sizes that you will be dealing with.

For example, you may intend to manufacture and repair steel protective casings. In this case, you know that your primary material will be steel, and that you will need fairly accurate machinery (since protective casings are usually built with tight tolerances).

Generally, you can do a lot with a lathe, a bench grinder, and a drill. Learn to use the basic machines, and if any specific needs arise that your machines can’t seem to fulfil, then you can expand to more specific machinery.

Learn to Operate both Manual Machines and CNC

CNC (computer numerical control) is a huge part of modern machining. Computer-aided machining has the potential for far greater accuracy and speed than manual machining. In fact, many people will espouse the superiority of CNC machining over manual machining.

While this is certainly true for top-end machines (that can cost hundreds of thousands of dollars), learning the principles of machining through manual operation is still a highly beneficial process.

Manual skills translate to a deeper knowledge of the principles of mechanical work. This not only allows you to operate CNC machines better, but gives you the ability and knowledge to identify and correct problems as they occur.

Master Basic Measurement Equipment

Essential machining equipment goes beyond simply the tools that do the actual machining. Measurement equipment is a vital part of any mechanical shop, and is critical in ensuring that work is completed to the highest degree of accuracy.

Learn to properly and accurately use the following tools:

  • Callipers
  • Micrometer
  • Centre Finder
  • Edge Finder
  • Dial Test Indicator

The above tools should be able to take most of the measurements necessary to carry out mechanical fitting and machining.

To familiarise yourself with their use, practice on a fairly complex part. Find a part (which you know all the dimensions of already) that has holes, curved edges, and multiple angles, and practice using the tools to calculate the dimensions.

If your measured dimensions correspond with the official ones, you know that your measurements have been accurate.

For more information about mechanical fitters or machining in general, contact a company such as Hamilton Engineering.

Read More
Page 5 of 8« First...34567...Last »